User Forum of Software BASEMENT
| BASEMENTBasic Simulation Environment for computation of environmental flow and natural hazard simulationLaboratory of Hydraulics, Hydrology and Glaciology (VAW)ETH Zurich |  |
You are not logged in.
- Topics: Active | Unanswered
#1 2016-02-15 10:22:40
- Adnan
- User
- From: Pakistan
- Registered: 2015-03-31
- Posts: 51
interpolation_fixpoints
hello sir ,
i want to create x-section between two x-section through interpolation . there in 1-d grid is a box name interpolation_fixpoints . i gave two x-sections in a reach at the starting of reach and at the end of the reach now i want to create x-sections in between them .
can you give me a example how to create the x-sections ?
Regards
Adnan
Offline
#2 2016-02-25 10:11:45
- Matteo Facchini
- Developer
- From: Trento
- Registered: 2014-09-05
- Posts: 284
Re: interpolation_fixpoints
Dear Adnan,
we suggest you to try to use the hec-ras cross-section generator and then import the cross-sections with our tool hecras2basement.
You can find it here: http://www.basement.ethz.ch/services/To … honscripts
Bests,
Matteo
Offline
#3 2016-03-08 08:56:10
- Adnan
- User
- From: Pakistan
- Registered: 2015-03-31
- Posts: 51
Re: interpolation_fixpoints
Sir Matteo
thanx for your help . is there any tutorial about using the python scripton converting the hec-ras geometry to basement geometery ?
regards
Offline
#4 2016-03-08 17:47:24
- Stephan Kammerer
- Developer
- Registered: 2015-03-31
- Posts: 67
Re: interpolation_fixpoints
Hi Adnan,
the Hec-Ras geometry can be converted using the QGIS plugin BASEmesh. The procedure is described in chapter 2.5 of the Pre-Processing tutorial available at the following URL:
http://www.basement.ethz.ch/services/Tu … orials.pdf
Regards,
Stephan
Offline
#5 2016-03-14 10:12:32
- Adnan
- User
- From: Pakistan
- Registered: 2015-03-31
- Posts: 51
Re: interpolation_fixpoints
thank you sir stephan .
Offline