User Forum of Software BASEMENT

Adnan

User

From: Pakistan

Registered: 2015-03-31

Posts: 51

channel network coupling prolem

hi sir ,

i am running a test of a junction by connecting two channels as inflow and one outlet , with a discharge of 3.5 l/s with x-sections at 0.2 m for 5 minutes.

but i am having the problem of "minimum water depth error . try to change the minimum water depth "

kindly  help me with this error

regards

Matteo Facchini

Developer

From: Trento

Registered: 2014-09-05

Posts: 286

Re: channel network coupling prolem

Dear Adnan,

as your error states you should try to change the minimum water depth. Try to give a higher value to that parameter.
Hope this helps.

Bests,

Matteo

Adnan

User

From: Pakistan

Registered: 2015-03-31

Posts: 51

Re: channel network coupling prolem

hi sir matteo ,

i have been trying with varying minimum water depths parameter but result is still the same .

regards

Matteo Facchini

Developer

From: Trento

Registered: 2014-09-05

Posts: 286

Re: channel network coupling prolem

Dear Adnan,

are you starting from a dry initial condition?  The two domains that you are connecting are both 1D/both 2D/one 1D and one 2D?

Bests,

Matteo

Adnan

User

From: Pakistan

Registered: 2015-03-31

Posts: 51

Re: channel network coupling prolem

yes . intial conditions are dry and all three domains are 1-d

regards